SWE-73-A – Digital Panel Display

SWE-73-A – Digital Panel Display

The low-cost SWE-73-A digital panel display is a small, simple digital panel indicator equipped with two measurement inputs: a current input (0-20/4-20mA) and a voltage input (0-5/1-5/0). ) -10/2-10V). The current input also has an overcurrent protection circuit that protects the standard resistor. Active input selection is performed by the software and the selected input can be changed at any time. In addition, the SWE-73-A allows the user to select a variety of conversion features: linear, square, square root, and user-defined (max. 20 point length). The 16-bit A/D converters used in them provide very high stability and measurement accuracy. The RS-485 interface facilitates the establishment of measurement networks in production process monitoring systems, as well as the use of indicators as intelligent, programmable, digital converters of input signals for computer systems. The meter can be configured with IR remote control or free S-Config software via RS-485 communication port. The configuration of the device can also be programmed according to the customer’s order.

You can contact Aykome Engineering for detailed information.

Digital Panel Display General Features

  • low cost counter in a small case
  • input type defined from menu: 0/4-20 mA; 0/1-5V, 0/2-10V
  • RS-485 / Modbus RTU
  • brightness can be adjusted in 8 steps
  • signal peak detection
  • all parameters are freely programmable with the remote control or the free configuration software S-Config