IFX-F100 – Clamp-on Ultrasonic Flowmeter for Fixed Installation


IFX-F100 – Clamp-on Ultrasonic Flowmeter for Fixed Installation

For fixed installations, the ISOIL IFX-F100 clamp-on ultrasonic flowmeter is used for pipes with a diameter range of DN10 to DN3000 in various materials.

The IFX-F100 clamp type flowmeter is suitable for measuring any liquid, regardless of conductivity, pressure or chemical properties, without interfering with the pipe. In addition, the IFX-F100 clamp-on ultrasonic flowmeter is equipped with a backlit LCD display and a 5-key panel for programming.

In addition, the setup support function ensures correct positioning of the sensors thanks to its simple and intuitive menu for quick and easy commissioning.

As well as digital or analog outputs including Modbus, RTU and HART, the analog inputs of PT100 temperature sensors can also measure thermal energy thanks to the temperature inputs.

Finally, the clamp-on Ultrasonic Flowmeter is also equipped with a large data logger to store up to 1,000,000 data in 100,000 records.

Technical Specifications

  • Ultrasonic measurement principle based on transit time
  • Speed range 0.01 – 25 m/s
  • Resolution 0.25 mm/s
  • Repeatability 0.15% of the measured value
  • Accuracy (Flow / Volume) ± 1-3% of the measured value depending on the application ± 0.5% of the measured value with a calibration in the field for comparison with the master meter
  • Accuracy (speed) ± 0.5% of the measured value
  • Measurement frequency 1 Hz
  • Response time 1 second
  • Damping reading 0… 99 seconds
  • Solid or gas content in the fluid <10% by volume
  • Aluminum housing for wall mounting
  • Degree of protection IP66 (EN60529)
  • Ambient temperature –10 +60 ° C (for electronics)
  • Power supply 100… 240 V a.c. or 9 … 36 V DC
  • Consumption <5 W
  • Backlit graphic LCD display
  • Weight (approx.) 0.75 kg
  • Menu languages Italian, English, Spanish (others on request)